Curt E16 Fifth Wheel Trailer Hitch Replacement Head Installation Video

The Buyers Products Fifth Wheel Lube Disk Steel Retention Clip part #337FWRC is designed specifically for Buyers Products Fifth Wheel Lube Disks like part #337FWD24 which have a circular indentation where the kingpin goes which holds the retention…

Reese Elite underbed rails and the Ford hitch prep packages are the exact same underbed rail systems. Reese makes the kits for Ford. For more info on this check out the link I attached to the right. The Curt leg kit part #C16017 that you referenced…

Yes, the Curt E16 5th wheel hitch head unit #C16515 can be installed on the R20 roller #C16550 by using the R5 Roller Adapter for Curt E5 and Curt E16 Fifth Wheel Trailer Hitches, part #C16505. I confirmed this fit with my Curt contact.

The Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BLU52XR can be used on the short bed version of the 2011 Ram 1500m but we don't typically recommend this since short bed trucks usually have issues with clearance between the truck cab and…

I checked with Curt, the correct Curt Custom Fifth Wheel Installation Kit for a 2023 Ford F-150 is part #C93WR. This is an excellent kit that has everything you need to install a fifth wheel hitch like the Curt A16 5th Wheel Trailer Hitch with S20…

I have attached for you below the maintenance schedule of the Curt A16 5th Wheel Trailer Hitch part #C16521 which does indeed entail greasing of the locking jaw mechanism, the pivot points in particular. The Prime Guard Wheel Bearing Hi-Temp Red…

The Curt A16 #C16521 requires lubrication of the skid plate, center pivot point, locking pawl, jaw pivot points, and linkage pivot points. I have attached the complete maintenance schedule below for your reference.

Yes, you can but the manufacturer's recommend not mixing up brands of rails and brackets. Depending on how old they are could also make them incompatible with your 2015 Ford F-150. The mounting holes in the rails may not line up with where the…

I have a solution for you but I am sorry the only offset balls that are available are for Curt's underbed package and B&W's turnover ball system. No one makes offset balls that fit the OEM prep packages. To get the clearance you need for…

Since the offset ball part #19308 carries the weight in the same location (the shank that installs into the hitch) there is no actual change in where the weight of the trailer is carried.

Draw Tite does make great hitches like the part #9465-56 which has been confirmed as a fit for your 2012 GMC Sierra 2500HD 6-1/2 foot bed. Here is the formula you will need to use to determine if you would have enough clearance to make tight turns:…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…