Solution to Add Brake Lights to Bike Rack

Question

Question:

Can you help? I thought I saw on your site a brake light that I can mount on my bike rack that plugs in to 4way flat plug. I cant seem to find it now. Do you have something like that?

asked by: Gearald M

1

Helpful Expert Reply:

Easiest solution for that would be the Curt auxiliary LED indicator lights part # C53201. This would allow you to add stoplight/turn signals to your bike rack and it plugs into a 4-way like you mentioned.

expert reply by: Jameson C

1

Answer 1

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 2

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 3

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Answer 4

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 5

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 6

Due to the limits of trailer taillight wiring circuits your Hollywod Racks Safety LED light bar part #HLY54RR is functioning properly. The turn signals and the stoplights are all on the same circuit so the lights are going to all light up when you…

view full answer...

Answer 7

Thanks for reaching out, Tommy! The closest thing we have for your 2024 Honda CR-V is the Curt Trailer Hitch Receiver #C12169 which is a Class II hitch receiver. This means it has the same 1-1/4" receiver opening as the Class I but it just has a…

view full answer...

Answer 8

For your 2019 Audi Q5 I highly recommend the Draw-Tite Class III Max Frame Trailer Hitch #76183 because it offers slightly better ground clearance than the alternatives (you don't have to worry about your bike rack hitting the ground when backing…

view full answer...

Answer 9

I checked the install instructions for the etrailer hitch #e94CR that fits your 2019 Audi Q5 and it does not require any fascia trimming.

view full answer...

Answer 10

Due to the way your 2020 Audi Q5 is set up there isn't a way to install a trailer hitch like the #76183 without removing the bumper. This sounds more invasive and difficult than it really is though. As long as you have basic hand tools and…

view full answer...

Answer 11

You may have to kick to either side of the hitch opening, but yes you could still operate the hands-free liftgate of your 2018 Audi Q5 with the Draw Tite hitch part #76183 installed. Due to how tightly this fits into the fascia opening for a hitch…

view full answer...

Solution to Add Brake Lights to Bike Rack

Product Page this Question was Asked From

Continue Researching