Trailer Valet Tandem Axle Trailer Wheel Dolly Set Manufacturer Demo Video

Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…

There is nothing wrong with your Trailer Valet XL Trailer Dolly #TVXL25. It is not able to make tight turns with a tandem axle as that creates tension since the wheels are trying to slide across the surface rather than roll. The Trailer Valet Trailer…

You are correct that the Curt safety chains like the Curt Safety Chains with Latching Hooks #C19749 are made over seas, but that does not mean they are not still a quality part. Quite a few manufacturers of chains actually use products from over…

As long as you verify that your tandem axle trailer and boat are not over 7000lbs then the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV74FR you were looking at will work just fine. This dolly is designed for tandem axle trailers…

The Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers part #TV74FR can be used on a single axle trailer if the weight of the trailer is under the 7,000 lb weight capacity of the dolly. It will do a great job of helping maneuver the trailer…

I have a solution that will work great but the #TV74FR won't work on gravel. Instead we do have the part #TVXL2 for if your trailer has a 2 inch ball which allows you to maneuver a trailer around much easier and we have found it does work on…

We have a great trailer dolly for you. It's the Trailer Valet 5X Swivel Jack and Trailer Mover, part #STC-V211. This dolly can handle trailers with a gross weight of 5000 pounds and tongue weights up to 500 pounds. It works by turning a crank…

We've had great luck with the Trailer Valet XL Trailer Dolly with Chain Drive #TVXL25 on inclines. We used to have a video online that showed us backing it up a steeper incline than the driveway you have in your picture. Your trailer weighing…

It sounds like you are referring to the security bolt which is part 21b in the attached diagram. The security bolt was designed to keep the Trailer Valet part #STC-V211 in place when the device is rotated to the stow position, and as an extra safety…

If you don't see any bolts holding the existing jack onto the trailer frame, it might have been installed by welding it in place. If this is the case, you'd need to grind off the welds, which is something you'd probably need a…

I went out to the warehouse with the writer who wrote the description for the Trailer Valet, #STC-V211, to determine if our stock is the old or new version. I am happy to report that we have the new version. The manufacturer states the following…

The Trailer Valet Trailer Wheel Dolly part #TV74FR are not designed for use on a vehicle. The only way possible to use them on such is with four dollies under all wheels. This would be costly but an option if you want the integrated lifting mechanism…