How to Remove Original Jack from 2015 Shorelander Boat Trailer
Question:
I have a brand new 2015 shore lander boat trailer. I purchased that EZ trailer caddy jack from you. Is there instructions how to remove this original hack? I dont see any bolts to take it off? Thanks in advance for your help.
asked by: Joseph P
Expert Reply:
If you don't see any bolts holding the existing jack onto the trailer frame, it might have been installed by welding it in place. If this is the case, you'd need to grind off the welds, which is something you'd probably need a professional welding shop to handle for you. If the jack or the trailer frame is galvanized, grinding on the trailer can create toxic fumes. Once the welds are ground off, the old jack would be removed. Then, the trailer frame would need to be smoothed out and repainted in the area where the jack had been.
You might have a jack that's held onto the mount by a snap ring, as shown in the provided photo. If this is the case, you'll need snap ring pliers to remove the snap ring. Once the snap ring is removed, you should be able to slide the jack right off the mount. If the mount doesn't interfere with the new jack, you can simply leave it in place. Otherwise, you'll have to grind off the welds as mentioned above.
Product Page this Question was Asked From
Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Trailer Dolly
- Manual Dolly
- 5000 lbs Capacity
- 15 Inch Tall
- Steel
- Silver
- Trailer Valet
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Shop: Suspension Enhancement
- Video: Trailer Valet 5X Swivel Jack and Trailer Mover Review
- Shop: Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Shop: RoadActive Suspension Custom Leaf Spring Enhancement Kit
- Shop: Stability Plus Stabilizer Helper Springs - OEM Leaf Springs Above Axle
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: Space Needed to Crank Trailer Valet 5X on V-Nose Trailer
- Search Results: drill adapter
- Video: Review of Stability Plus Vehicle Suspension - Rear Axle Suspension Enhancement - SPS84FR
- Video: SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SSA28 Review
- Video: Stability Plus Stabilizer Helper Springs Review
- Article: Best Boat Trailer Jacks
- Q&A: Will Trailer Valet Handle be Able to Turn on Boat Trailer
- Q&A: How to Install the Security Bolt on the Trailer Valet 5X Swivel Jack Part # STC-V211
- Q&A: Is the Trailer Valet Swivel Jack and Trailer Mover the New or Old Version
- Shop: Trailer Hitch
- Video: Review of Timken Trailer Races - Replacement L68110 Race - TMK86VR
- Search Results: valet
- Q&A: Trailer Valet Recommendation for Fitting In Tight Garage Space
- Shop: Front Mount Hitch
- Q&A: Trailer Valet Recommendation to Make Moving a Trailer Easier
- Q&A: What are the High and Low Gear Ratios for the Trailer Valet Swivel Jack and Trailer Mover
- Search Results: winch
- Video: EcoHitch Hidden Front Mount Trailer Hitch Installation - 2021 Ram 2500
- Video: Trailer Valet Tandem Axle Trailer Wheel Dolly Set Manufacturer Demo
- Search Results: jacks and jack stands
- Search Results: dutton lainson jack