Will the Trailer Valet Trailer Wheel Dolly Set Work On a Vehicle

Question

Question:

Hi, can I use these to move my 1964 Chevrolet around my garage ?

asked by: Doug N

0

Expert Reply:

The Trailer Valet Trailer Wheel Dolly part # TV74FR are not designed for use on a vehicle. The only way possible to use them on such is with four dollies under all wheels. This would be costly but an option if you want the integrated lifting mechanism that standard dollies like the Wheel Dolly part # PTW54013 don't have.

expert reply by: Conner L

0

Answer 1

The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 which is part 90950600 you referenced is does not have a specific wiring diagram, but I've attached the closest thing and have also included a video of an installation to…

view full answer...

Answer 2

The Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers part #TV74FR can be used on a single axle trailer if the weight of the trailer is under the 7,000 lb weight capacity of the dolly. It will do a great job of helping maneuver the trailer…

view full answer...

Answer 3

You are correct that the Curt safety chains like the Curt Safety Chains with Latching Hooks #C19749 are made over seas, but that does not mean they are not still a quality part. Quite a few manufacturers of chains actually use products from over…

view full answer...

Answer 4

The Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K #TV34FR has a 2,000 pound capacity. I think the confusion is coming from the tongue weight formula. The Trailer Valet JXS is designed to hold up the…

view full answer...

Answer 5

Trailer Valet XL Trailer Dolly #TVXL25 will be able to move your trailer at the near 90 degree angle and up the incline of the driveway. The dolly has 2 gears and you will likely find that the low speed, 27 to 1 ratio will make it easier on you…

view full answer...

Answer 6

I recommend the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor with Night Vision, #SH02DIGITAL. This is a wireless system with night vision capability, the camera has both a magnetic and a suction cup mount. It can be attached to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 12

Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…

view full answer...

Will the Trailer Valet Trailer Wheel Dolly Set Work On a Vehicle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching