Trailer Wiring Harness Installation - 2007 Toyota Tacoma Video

If the lights are not working on your trailer and you are unable to find any current at the vehicle side connector it sounds like you may have a blown fuse. Per the installation instructions for the T-One Vehicle Wiring Harness for Factory Tow…

In order to install a 7-Way trailer connector on your 2007 Toyota Tacoma you would first need to install a 4-Way and then hardwire in a 7-Way using #ETBC7. There isn't a plug-in 7-Way available for your truck. For a 4-Way you are correct, they do…

Since the 7-way connector on your 2007 Toyota Tacoma has been damaged, you can use the Tow Ready Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector, part #20119. This will give you a 7-way and 4-way connector on the back of your truck. I have…

I've included two pictures, one of a 7-way "Blade" connector, and a 7-way "Round" or "Round Pin" connector. If you have a plug that is compatible with the blades, which will have flat openings in the trailer side…

When people install truck bed tool boxes like the part #UWS08298 in the bed of trucks like your Tacoma normally holes are drilled through the floor of the box and the truck bed and hardware is ran through both which secures it. We have this as an…

Sounds like you are looking for a 7-way for a brake controller and a 12v hot lead for your 2008 Toyota Tacoma, so I would recommend the Universal Installation Kit for Trailer Brake Controller, part #ETBC7. This includes everything needed to install…

What you'll need is the 4-way kit part #CU94FR and then to convert it to a 7-way all you'd need is the part #37185 which will bolt right up to the 7-way bracket your vehicle has currently.

Thank you for your recent purchase from etrailer.com. If you purchased a 2-fuse bypass and only need a single you can certainly still use this item in your application. The bypass will still function to override the mini fuse when switched to the Tow…

Hey Anna, we have just what you need to activate the trailer wiring on your 2007 Toyota 4Runner and will plug right into the two connectors you have pictured (thanks for that by the way). What you need is the Hopkins part #HM43374 which gives you…

Curt trailer wiring harness #C56513 plugs in line with the tail light wiring on your 2007 Toyota Tacoma. We do not currently have a video of this particular harness being installed but I have included a link to the installation instructions. The…

The factory harness to plug in a brake controller wiring harness on your 2007 Toyota Tacoma is located underneath and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 5-pin connector that mates…

If they installed the OEM tow package wiring in your 2016 Qudi Q5 TDI, then there should be the connection under your dash for the wiring harness to be a simple plug and play. The Curt Custom Wiring Adapter for Trailer Brake Controllers #C51522 will…