Max-Frame Trailer Hitch Installation - 2018 Subaru Impreza - Draw-Tite Video

You'll want to scrape off the undercoating so that the hitch will mount to a flat surface. If you expose any bare metal from the scraping, you can shoot any bare metal with a quick shot of rust inhibiting spray paint if you wish. Since the…

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…

Yes we do have a Draw Tite Class III hitch part #76209 that fits your 2020 Subaru Impreza Wagon! This has plenty of towing capacity and a 2 inch opening. I attached an install video for this for you to check out as well.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

When we installed the Draw Tite Hitch part #76209 on a 2018 Subaru Impreza Wagon just like yours we found the height from the top of the trailer hitch opening to the ground measured 10 inches. So what you'll need to do is measure from the bottom…

Your 2013 Honda CR-V can be equipped with any of three different classes of hitch, Class I, II or III. These differ in their towing capacities and sizes. Both Class I and class II hitches have a 1-1/4-inch receiver opening while a Class III hitch has…

When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver part #76209 on a 2019 Subaru Impreza Wagon there was about 10 inches of ground clearance which is pretty standard. I don't see you have any issues with ground clearance with daily…

Both the hitches you mentioned have the same ground clearance. The Draw Tite #76209 and the Curt #C13382 both have 15 inches from the top of the hitch opening down to the ground.

We installed the Draw-Tite Max-Frame Trailer Hitch Receiver part #76209 on the a 2018 Subaru Impreza 5-Door Wagon and had 10 inches of clearance from the top of the hitch receiver to the ground. This is a pretty standard amount of ground clearance…

For a Curt trailer hitch that is a confirmed fit for your 2019 Subaru Crosstrek we have the part #C13382 which I would recommend highly. It has a 2 inch opening which means more accessories are made for it and it has higher weight capacities as well…

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite hitch…