Trailer Hitch Installation - 2018 Ford Escape - Curt Video

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The primary difference is a matter of numbers. When installed, the Draw-Tite Class III #76025 will sit so the inside top edge of the receiver tube sits about 13 inches above the ground, and the receiver tube will sit under the bumper so that the…

The correct Curt T-Connector Vehicle Wiring Harness for a 2019 Ford Escape is part #C95FR, not part #C56320 which is a fit for a 2017 - 2018 Ford Escape.

The pintle hook mount that I would recommend for you is the Pintle Hook Mount, 12-1/2 inch Tall, 8K, part #63058. This hook mount has an adjustable rise that will go up to a 12 inches. That would put the height of your pintle hook mount right at 31…

The correct Curt Trailer Hitch Receiver for a 2018 Ford Escape is part #C13186. This trailer hitch offers a bolt-on fit without any drilling required. It will work great for towing or hitch mounted accessories like bike racks and cargo carriers. It…

I recommend the Curt #C13186. This hitch will give you the hidden look you mentioned while maintaining a 3,500 pound gross towing capacity. You will want to check your owner's manual for the towing capacity of your vehicle. The towing…

It sounds like you're looking for the mounting hardware kit for a Curt #C13186 hitch which is a confirmed fit on the 2013 - 2019 Ford Escape. You'll want to use the Replacement Hardware Kit #RHK and in the field on that page where it…

For your 2018 Ford Escape SE I recommend the etrailer.com Class III Trailer Hitch #E98866 because of its hidden crosstube design that allows for a clean factory appearance because only the receiver itself is visible (see attached image) and unique…

The 2017 Ford Escape S has a set of turndown exhaust pipes that are different than the other sub-models. The only Curt hitch that is a confirmed fit for the S edition is indeed part #C13186. The Curt Trailer Hitch Receiver is a Class III hitch with…

Thank you for your purchase of the etrailer Trailer Hitch Receiver #e98866 for your 2014 Ford Escape. The issue you are seeing with the hitch not appearing wide enough is called "flexing" and can be an unfortunate byproduct of the…

Based on my research your 2017 Ford Escape with the 2.0L engine has a towing weight capacity of 3,500 pounds if it's equipped with the Class II factory tow package or 2,000 pounds if it's not. If you are unsure if you have the tow…