Trailer Hitch Installation - 2012 Nissan Juke - Curt Video

The trailer hitch I recommend for your 2013 Nissan Juke FWD is #24892. Installation of this hitch is different than for the one on your 2011 Juke. Basically it does not use any weld nuts in the vehicle frame. None of the hitches for the 2013 FWD do.…

The size bolts that come with the Draw Tite hitch part #24867 are M12 X 1.25 X 35mm CL8.8 and M10 X 1.25 X 30mm CL8.8. Looks like the passenger side bolts are the M12 size and the driver side is M10. Since most likely you are dealing with corroded or…

The Draw-Tite Class I hitch you referenced, part #24867 is indeed a fit for AWD Juke models only. For the front wheel drive model, you will need the Draw-Tite Class I receiver, part #24892. I have spoken with my representative at Draw-Tite, who has…

To install any of the trailer hitches for the 2013 Nissan Juke, front wheel drive, you will need to enlarge an existing access hole on the frame. This can be done in several ways including using a drill, rotary tool, or file. You will still need to…

It sounds like you already know what you need to do but if the exhaust is rattling after installing the Curt Trailer Hitch Receiver part #C11302 on your 2013 Nissan Juke there is really only one solution for this and that is to bend the exhaust…

We do have trailer hitches and hitch mount cargo carriers that are compatible with your 2013 Nissan Juke. If you have the AWD model I recommend the Draw-Tite #24867 but if you have the FWD model than I recommend the Draw-Tite #24892. I like the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…