Trailer Hitch Installation - 2004 Dodge Ram Pickup - Curt Video

According to our records, the cold brake switch wire on a 2004 Dodge Ram 2500 should be a white/tan wire. Wire color is not always universal, so if you do not find a white/tan wire, you can use a wire tester like part #PTW2993 to determine wire…

On my 2004 Dodge Ram (which would be the same as your 2003) the factory trailer connector plug split off from a larger wiring harness on the inboard side of the drivers side frame rail near the rear bumper. There should be a rectangular connector…

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

The factory trailer hitches on the 2006 Dodge Ram 2500s are welded on. You can add a Class V Curt hitch, #C15409 for a 2 inch receiver or #C15809 for a 2-1/2 inch receiver, and either will install beneath the factory hitch. I have linked videos…

Yes, it is very possible to install/fit a 7-way trailer connector on a 2004 Dodge Ram 1500. I first recommend looking under the vehicle for a square ten pin connector. This (if present) will be located behind the rear bumper near the spare tire and…

You can add a 7-Way trailer connector and retain the use of a 4-Way as well by installing #37185. The 4-Way you have will plug into the 37185 and the remaining wires would have to be hardwired in. The white wire grounds to the truck frame. Black is…

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

Yes, the inside dimensions of the entire length of the Tow Ready Combo Bar #80948 that you referenced is 2 inch by 2 inch.

The factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part #C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do…

If you were to use an extension such as #C45048 with Curt trailer hitch #C15809 on your 2006 Dodge Ram 2500 then it would be limited to 4,500 pounds at the 34 inch length. But at the 24 inch length it is rated for 6,000 pounds and a standard length…

For your 2003 Dodge Ram 3500 long bed dually with the factory installed trailer hitch you are likely using rear camper tie-downs #TLD3109. If you switch to a non-Torklift aftermarket trailer hitch you would need to use #TLR3500 for the rear…

For your 2004 Dodge Ram 2500/3500 with a factory hitch you would want the Curt Hitch part #C15809 as it has plenty of capacity for your 14k trailer at 20k trailer rating and 2,700 tongue weight. For your trailer with a 1,500 lb tongue weight capacity…