TorkLift Rear Frame Mounted Camper Tie Downs Installation - 2007 GMC Sierra Classic Video

I spoke with my contact at TorkLift who said that if you have the rear Tie-Downs #TLR3500 then you could potentially use the tie-downs if the aftermarket trailer hitch has room for the 4" x 4" footprint on the side plate for the tie-down.…

For your 2004 Dodge Ram 2500/3500 with a factory hitch you would want the Curt Hitch part #C15809 as it has plenty of capacity for your 14k trailer at 20k trailer rating and 2,700 tongue weight. For your trailer with a 1,500 lb tongue weight capacity…

If you were to use an extension such as #C45048 with Curt trailer hitch #C15809 on your 2006 Dodge Ram 2500 then it would be limited to 4,500 pounds at the 34 inch length. But at the 24 inch length it is rated for 6,000 pounds and a standard length…

The factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part #C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do…

We do not have a custom tie-down kit for your 1984 Chevrolet pickup but I may have a solution for you. I called my contact at TorkLift and they told me that you can look under the front of yoru truck bed near the cab and see if you have a 4x4 inch…

For your 2003 Dodge Ram 3500 long bed dually with the factory installed trailer hitch you are likely using rear camper tie-downs #TLD3109. If you switch to a non-Torklift aftermarket trailer hitch you would need to use #TLR3500 for the rear…

If you click the following links I've provided for the #TLA7004 Camper Anchor Relocation Kit, the #TLD2101 Front Camper tie downs and the #TLR3500 Rear Camper tie downs, you can see current pricing. For a 2004 Dodge Ram 2500/3500 long bed,…

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

Yes, the inside dimensions of the entire length of the Tow Ready Combo Bar #80948 that you referenced is 2 inch by 2 inch.

I spoke with my contact at Curt, who tells me that some Ram trucks, even though they were manufactured as pickup trucks were assembled using the spring mounts from the cab and chassis trucks. The Cab and Chassis truck spring mount would extend below…

I do have options for you but you cannot install two of part #C45796 together to get a total of 36". Doing so would completely diminish your trailer hitches weight capacity. The most cost effective solution I have for you would be to use part…

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…