2004 Dodge Ram 2500 - Which Wire Is The Cold Side Of The Brake Switch?

Question

Question:

2004 dodge 2500, which one of the 5 wires that go to the brake pedal is the cold one

asked by: Paul

0

Expert Reply:

According to our records, the cold brake switch wire on a 2004 Dodge Ram 2500 should be a white/tan wire. Wire color is not always universal, so if you do not find a white/tan wire, you can use a wire tester like part # PTW2993 to determine wire function.

expert reply by: Jesse M

0

Answer 1

On my 2004 Dodge Ram (which would be the same as your 2003) the factory trailer connector plug split off from a larger wiring harness on the inboard side of the drivers side frame rail near the rear bumper. There should be a rectangular connector…

view full answer...

Answer 2

You can add a 7-Way trailer connector and retain the use of a 4-Way as well by installing #37185. The 4-Way you have will plug into the 37185 and the remaining wires would have to be hardwired in. The white wire grounds to the truck frame. Black is…

view full answer...

Answer 3

Yes, it is very possible to install/fit a 7-way trailer connector on a 2004 Dodge Ram 1500. I first recommend looking under the vehicle for a square ten pin connector. This (if present) will be located behind the rear bumper near the spare tire and…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

2004 Dodge Ram 2500 - Which Wire Is The Cold Side Of The Brake Switch?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching