Trailer Hitch Installation - 2014 Dodge Ram 2500 - Curt Video

Yes, the Curt Trailer Hitch Receiver #C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver…

The OEM hitch on your Ram truck is welded to a cross member located behind the rear bumper. The cross member is an integral part of the vehicle structure and should not be removed, according to Curt. There are other hitches available that would…

Even if you have a factory installed hitch on your 2008 Dodge Ram 3500, you can still use Curt hitch #C15809. The Curt hitch will fit beneath the factory hitch and provide you with a 2-1/2 inch receiver. I have included a link to the installation…

For your 2003 Dodge Ram 3500, you can use a Curt installation kit #C16420-204 which is more cost effective than the Husky kit. You can view current pricing by clicking on the link to the product below. The rails in this kit will accept Curt,…

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

The direct replacement for your Atwood Gc6aa/10E water heater has been discontinued. I recommend the Atwood RV Water Heater Item #DMC74FR which only requires a 12-3/4" x 12-3/4" cutout. This is a standard gas and electric, 10,000 BTU water…

We have programmers that can add a ton of power to your 2007 Dodge Ram with a 5.9 Cummins, but we do not have any Vivid programmers. The Edge Evolution CTS3 part #EP36YR can add up to 175 horsepower and 470 ft lbs of torque to your vehicle.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

Yes, the 2-1/2 inch weight distribution shank part #C17131 will work with the Curt MV weight distribution system part #C17057 which will allow you to not have to use a hitch reducer.

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…