TorkLift Front Frame Mounted Camper Tie Downs Installation - 2003 Ford F-350 Video

The 2-1/2 inch opening is not going to be a problem. The rear tie downs, #TLF3001, come with a sleeve that fits around the outer tube and inside of the open ends of the hitch on the truck. With the sleeve on the width of the outer tube becomes 2-1/2…

Although the #TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use #TLF3001 or #TLF3001A for an aluminum/stainless tie down.

The hitch opening location for the Torklift Hitch part #TLF1002-30 that you referenced will be very close to where you current hitch opening is. If the 28 extension part #TLE1528 would work well based on your current measurements it would be a great…

You will need a new TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLF1008-30 for your 2017 Ford F-350. The hitch cross bar is longer on the 2017 than the TorkLift Receiver #TLF1002-30 on your 2009 Ford F-350 so new side brackets will not allow…

TorkLift doesn't have their instruction manuals posted online so I'm unable to find the exact step by step instructions, but I was able to find a video where Shane will walk you through installing a similar front mounted tie-down model to…

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

We do not have a custom tie-down kit for your 1984 Chevrolet pickup but I may have a solution for you. I called my contact at TorkLift and they told me that you can look under the front of yoru truck bed near the cab and see if you have a 4x4 inch…

According to Brophy the Stake Pocket Mounted Camper Tie Downs #TDSF will fit most all pickup trucks up to 2010 model years. As there is no exact fitment guide I recommend verifying the measurements with your 2002 Ford F-250 to ensure proper fit. The…

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 1999 Ford F-250 with factory hitch is part #TLF2011 for the front if you have an 8' bed or part #TLF2007 for the front if you have a 6-3/4' bed and part #TLF3001 for the rear.…

If you do indeed have a factory hitch on your 2006 Ford F-350 Dually long bed, the options available for you for frame-mounted camper tie-downs on your depend on if you have boards or steps installed on your truck. If you do have boards/steps…

It sounds like you might be looking for a set of frame mounted camper tie downs and if that's the case we do have an option for you in the TorkLift Custom Frame-Mounted Camper Tie-Downs part #TLF2011 which are a fit for a 2006 Ford F-250 8'…

When installing the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2011, you will not disconnect the emergency brake cable. You will go underneath the emergency brake cable with the driver's side bracket. You will need to make sure…