Trailer Brake Controller Installation - 2009 Ford F-150 22292 Video

To install a 7-way in your 2010 Ford F-150 with a factory 4-way all you would need is the #37185. This will plug into the 4-way you currently have and will give you both a 4-way and a 7-way at the rear of your truck. To complete the 7-way wiring you…

The Adapter 4-Pole to 7-Pole and 4-Pole #37185 is a universal part that will work on most vehicles and will require you to either run additional wiring for the charge line circuit, brake line and reverse light wires. These can either be new wiring…

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

If you are just needing a 7-Way to activate the lights on your trailer then you will simply need to use the Hopkins #37185 that you referenced along with a No-Drill Mount Bracket #18140 as depicted at the start of the attached installation video on a…

To convert the factory 4-Way flat trailer connector on the back of your 2010 Ford F-150, you will need Adapter 4 Pole to 7 Pole and 4 Pole, #37185. You will plug the factory 4-Way into the back of the adapter and hardwire the remaining 4 wires. The…

To add a 7-Way trailer connector to your 2010 Ford F-150 with a factory 4-Way you will need #37185. This is a partial hardwire installation but on your truck it will be easy. I have linked a video that should help. Go to about the 10 minute, 50…

To install a 7-Way trailer connector on a 2007 Ford F-150 with a factory 4-Way, you will need to use #37185. This is part plug and play and part hardwire, but the hardwire locations are easy to access. You will need to ground the white wire to the…

The 2011 Ford F-150 should have come with either a factory 4-Way or factory 7-Way trailer connector. To upgrade from a 4-Way to a 7-Way you will need #37185. If you follow the factory 4-Way wiring under the truck you will see where it plugs into…

I can help you convert your 4way to a 7way on your 2014 Ford F-150. Since your vehicle is equipped with a factory 4way plug you will first need the Curt harness #C56110. To get a 7way for your trailer needs I recommend an adapter like the #ETBC7.…

If your 2015 Ford F-150 didn't come equipped with a factory brake controller then you shouldn't need to have the computer flashed in order to install an aftermarket unit. If you have a Tekonsha or Draw-Tite controller the Plug-In Adapter…

The adapter that is used in the Universal Installation Kit #ETBC7 is the Hopkins #37185. This unit has 16 gauge wires for the Green, Yellow, and Brown wires and then 12 gauge wires for the Blue, White, Black, and Purple wires. I have confirmed this…

The 2007 Ford F-150 either came equipped, from the factory, with a 7-way trailer connector or none at all. Since you don't have a trailer connector at all on yours you'll need to start by adding a 4-way connector like the Hopkins Plug-N-Tow,…