Trailer Brake Controller Installation - 2013 Ford F-150 22292 Video

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

The plug on a 2013 Ford F-150 to plug in a brake controller wiring harness is hidden pretty well. You actually have to temporarily remove a panel from the center console to access it. Wiring harness #22292 is the correct wiring harness for you truck.…

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

For your 2016 Ford F-150 if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the #37185 and the install harness part #22292. If you…

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

There is no specific torque rating for shackle bolts. Basically for the middle bolt there should be enough free play in the shackles to allow them to move. Tightening the shackle bolts too much will squeeze the shackle straps against the leaf springs…

The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's…

The Draw-Tite trailer hitch, #75726, will fit your 2008 Toyota Highlander with the factory OEM 19 inch full-size spare tire. There is a special note in the instructions which I have linked for you. The note states that when storing the spare, it is…

Yes and yes, all of the installation hardware needed to install the Draw Tite Hitch part #75726 on your 2008 Toyota Highlander are included. Also, you will be able to keep your spare tire in it's current location after the install is complete.…

The 1-1/2" Square Trailer U-Bolts #SP01-120 is not galvanized and we don't have any in this size that are.

For just 5th wheel base rails and an installation bracket kit you can use with your existing Reese hitch you can use part #RP50081-58. This is a custom kit that will reduce drilling and overall installation time. This one kit will fit all three bed…

Your 2013 Ford F-150 must have come with the factory 4-Way connector. Since the harness for that connector uses a square plug and not the round plug, a simple plug and play 7-Way is not available. You will have to partially hardwire in a 7-Way using…