Roadmaster Battery Charge Line Kit Installation - 2000 Fleetwood Bounder Motorhome Video

Roadmaster has diode style tow bar lighting kits that fit your 2022 Jeep Cherokee Trailhawk like with the part #RM63MR but they do not list any of their bulb and socket kits as a fit due to space constraints in the housing of the light assemblies.

The charge lines connect to the 12V pin on both the 7-way of your motorhome (1 o'clock position) and the 6-way (center pin). The wiring pigtail will ensure the connection between these pins so your motorhome will provide a maintenance charge to…

In order for your Blue Ox Alpha to work with the Roadmaster EZ4 Base Plates, part #RM-523160-4, you need an adapter like part #RM-032. In addition to the tow bar and base plates, you will need a system to join the tail lights of the motorhome to the…

To protect the 12 volt accessory power supply circuit, we recommend using a 40 amp inline circuit breaker, part number 9510.

The lights sockets you refer to are indeed available without the rest of the kit. You would need part #RM-155-2, which you can see by clicking on the provided link.

A 12V trailer power circuit will typically be wired with 12-gauge wire, part #12-1-1, but certainly there is no harm in using heavier 10-gauge wire #10-1-1. If one tow vehicle is longer than another, our installers may opt to use the heavier gauge…

Generally, the center pin on a standard 7-way is used for reverse lights on the trailer. However, not all trailers have reverse lights and essentially you can wire the extra pin anyway you'd like. Normally, the pin in the 1 O'clock position…

The wire gauge of the blue wire on the Hopkins Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, part #47515, will be too small to be able to use as a 12 volt power source. You will need to use a 10 gauge wire on your truck to run a 12 volt power wire…

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

Yes, you can flat tow a vehicle with a Roadmaster base plate with a Blue Ox tow bar as long as you get the correct adapter like the part #RM-032 to connect the two. This is the style of adapter for the Roadmaster base plates that have to use a…

I attached a picture that shows how 6-ways are typically wired. Looking at your picture it doesn't look like the colors will match up and you will need to wire by function instead of by color. Most likely the missing circuit on your 6-way wiring…

The 2022 Ford F-150 (Non-Hybrid) requires special diodes for the flat-tow wiring harness. If you're not using these special diodes then you could run into issues like you described. The correct ones for this vehicle are the Roadmaster Universal…