Reese Quick-Install Custom Bracket Kit and Base Rails Installation - 2019 Ford F-250 Super Duty Video

I may have a solution for you, however the Pro Series Replacement Handle Kit #58180 referenced in your question is not compatible with your Reese 5th Wheel Trailer Hitch w/ Square Tube Slider #RP30051. This replacement handle is designed specifically…

The handle that actuates the jaws for the #RP30051 Reese 16K fifth wheel hitch is indeed the #58055 replacement handle you mentioned. The Handle, Foam Grip and cotter pin are included. If you need the actuating rod the handle attaches to as well, it…

Your Grand Design Solitude will have a Lippert 1621 pin box, and since your trailer has a 16,600 lb GVWR, you'll need the 20k Goose Box, which is the following part number the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter…

The brackets unfortunately are not sold separately so you would need to purchase a whole new kit in order to mount your Curt E-16 hitch. I recommend the B&W Custom Installation kit #BWRVK2402 as it requires no drilling into the frame and will…

Reese has a custom fit bracket kit that fits your 2019 Ford F-350 with the part #RP50074 but the #RP50026 does not fit your truck.

The isolator strips that come with the part #RP56017-53 should be used when installing this rail kit. There's not telling how long electric tape would hold up so to prevent damage to your truck I would not recommend using it instead of the…

If you are looking for the complete fifth wheel rail kit for your 2016 Ford F-250 short bed you would want the part #RP50026-58 which is a custom fit kit that would install much quicker and easier than universal rails. If you only needed the brackets…

Yes we do have the part you are looking for. It is the replacement hardware kit for Draw-Tite and Reese 5th wheel rails #58164. Hardware should always be replaced if moving the install kit from one truck to another. This is because the hardware is…

The carriage bolts you are referring to that go through the rails and bed of the truck are grade 5. You do not want to use hardware that is rated any lower than this. The correct hardware is part of what gives the installation kit the weight capacity…

Congrats on the new trailer! You will need a sliding 5th wheel hitch. A standard fixed hitch like the Curt A20 item #C16140 won't provide you with the necessary clearance you'll need. You'll end up running the nose on your Dutchman into…

I have attached the complete installation instructions for the Reese Universal Base Rails and Installation Kit #RP30035 that is included with the Pro Series Sliding Hitch #PS30129. This is a universal rail kit that is designed to fit most trucks. You…

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer…