Reese Fifth Wheel Bracket Kit that Fits 2019 Ford F-350

Question

Question:

Would this kit work on a 2019 Forrd F350 short bed

asked by: Dennis R

0

Expert Reply:

Reese has a custom fit bracket kit that fits your 2019 Ford F-350 with the part # RP50074 but the # RP50026 does not fit your truck.

expert reply by: Jameson C

0

Answer 1

The Curt E16 5th Wheel Hitch that you referenced, part #C16115, is rated for 5th wheel trailers up to 16,000-lbs gross towing weight. Gross towing weight means the trailer weight plus the weight of all loaded water, propane, supplies and equipment -…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 7

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

The total weight of the PullRite OEX SuperLite 5th-Wheel Hitch for Ram Prep Package(4815) #PUL56ZR is 143lbs. The Head #PUL99ZR weighs 49lbs while the Base #PUL56ZR weighs 94lbs. While we do not carry the 2600 currently(5/15/2024) it has a total…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

view full answer...

Answer 12

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Reese Fifth Wheel Bracket Kit that Fits 2019 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching