Review of Reese Fifth Wheel Installation Kit - Outboard Mounting Brackets - RP56016 Video

Hi Rick, We do have the correct Curt 5th wheel brackets that fit your 2018 Ram 2500, though it's a different part number than the one you mentioned. The correct brackets are the following: - Curt Custom 5th Wheel Bracket Kit for Ram Truck #C16427…

We offer both universal-fit and custom-fit 5th wheel installation kits for your 2012 Ford F-250/F-350 Super Duty. The custom kits, such as the Curt #C16424-204 that you referenced, require less drilling and will save you considerable installation…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The rail kit #DM6014 that you referenced will fit your older Demco 5th wheel hitch if it uses base rails that run side to side. To mount these rails to your 2001 GMC Sierra 2500HD with the 6-1/2' bed you need the Universal Mounting Brackets…

The wiring colors shown in the picture you submitted don't match totally with industry standard 7-way wiring colors but I can still help you get them connected where they belong. Most likely it looks like the bundles red and orange wires are 12…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Since you have the older style Demco fifth wheel hitch FWH 24PA you have to use the Demco Older Style Rails part #DM6014. Then for a bracket kit you'd want the part #DM8552011 which is a custom fit bracket kit for your 2015 Chevy Silverado…

Excellent question, and there is anti-corrosion protection for the aluminum bed of your 2018 Ford F-150 that comes with the B&W base rails and install kit that fits your truck, though it is not in the form of shims. What the kit comes with is a…

The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part #37185 which your 4-way will plug into and then…

I checked out the install instructions for the Air Lift kit part #AL57297 that you have and it would easily fit with the Reese Outboard Rail Kit part #RP56011-53 that you referenced.

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…