etrailer Trailer Hub and Drum Assembly Installation AKHD-545-35-K Video

In order to correctly measure a hub/drum you'd need to do so on the inside, where the shoes ride. I have attached a photo below that shows this. The Trailer Hub and Drum Assembly part #AKHD-545-35-K for example measures 10" x…

Your picture didn't make it through. But to pick out drums you'll need to get me the diameter of the spindle on your trailer or the numbers off of the bearings.

The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.

We have had a customer with your same UFP hub HD-1377 successfully use as a replacement the hub/drum #AKHD-545-35-K which works on 3500-lb axles. This hub uses inner bearing #L68149 (1.378" inner diameter) and outer bearing #L44649…

It sounds like you've got the now discontinued Dexter Trailer Hub and Drum for 3,000-lb Axles - 10" Diameter - 5 on 4-1/2 008-418-02 as your hubs on the 2015 Jayco White Hawk 23 MBH. You can replace these to replace your old hubs…

The bolt pattern of your existing hubs is likely to be 5-on-4-1/2 as this is a popular configuration, but there are actually four different 5-lug bolt patterns available in our replacement hub/drum products. You can refer to the linked article on…

If you need new brake assemblies for your 3,000 lb axle your best option is to stick with the size you have and use the part number #K23-472-473-00 for a replacement. The temptation is to use more powerful brake assemblies which would give impression…

The overall width of the drum would be around a 1/2" wider than the shoes on the backing plate but this will not be relevant when selecting replacements as the parts will be based on the dimensions of the backing plate which in your case is…

The #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop part #TRU87FR is designed for a 3,500 lb axle with a 2-3/8" outer diameter. I don't have a list of every trailer that the spindle will fit but so long as…

The big difference between 3,000 lb axle trailer brake assemblies and 3,500 lb trailer axle brake assemblies is the width of the brake pad. The 3,500 lb kits like the #23-468-469 are 2-1/4 inches wide and the #K23-472-473-00 which fits the 3,000 lb…

The 1-1/16 measurement is the diameter of where the outer bearing rides on the spindle. There are different capacity spindles that have this same measurement. Ones with a thicker stem, the part welded to the axle, have a higher capacity and that is…

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.