Durabilt Hammer Lock Coupling Link Installation - 2022 Ford F-450 Super Duty Video

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

We offer weight distribution shanks for 2-inch and 2-1/2-inch hitches, shown on the linked page, but not one for a 3-inch hitch. We can still help you. Adding Curt reducer sleeve #C45408 allows dropping a 3-inch receiver down to either the 2-1/2-inch…

I do have a solution for you, however, there currently is not a 3" shank available for a weight distribution system. You will need to use a reducer sleeve such as Curt Hitch Receiver Reducer Sleeves #C45408, which will reduce a 3" receiver…

Yes, the Curt Hitch Receiver Reducer Sleeves part #C45408 will allow you to use a 2" shank inside a 3" trailer hitch receiver opening. This reducer has a carbide black powder coat finish which will reduce the chance of rust and it has a…

According to my contact at Pop and Lock, the #PAL8205 will lock and unlock your tailgate independently of the key lock, as long as it is a Ford tailgate. You would also be able to unlock the tailgate with the key and lock it with the key fob or vice…

I was able to take a picture of the instructions for the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit #3460006 that you referenced. The camera unit actually has a "T" harness that will send the video feed directly to the…

The Custom Third Brake Light Camera for 8" Factory Monitor part #3460006 which is a fit for a 2015 Ford F-350 does come with a switch that can be substituted for a switch of your own such as a pre-existing upfitter stitch. This was been…

To see where the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7728 that you referenced will mount check out the picture I attached. It basically will attach to the passenger side frame rail just to the front of the leaf…

I spoke to my contact at GCH and they informed me that the Custom Third Brake Light Camera for 8" Factory Monitor part #3460006 would be compatible on a 2015 Ford F-350 Super Duty with Sync 3 Upgrade.

The Truck Bed Cargo Camera for 8" Factory Monitor part #3460006 which is a fit for your 2016 Ford F-350 will only draw around 0.3 amps. I spoke with GCH and they recommend that you use a 3 amp fuse for the switch. If you cannot replace one of…

I spoke with my contact at Torklift about your 2013 Ford Super Duty truck. Since the TorkLift HiddenPower Under-Vehicle Battery Mount, part #TLA7728 will only mount in one location, you would be limited to 1 on your truck. This comes with the battery…