Correct Custom Third Brake Light Camera for 2015 Ford F-350 Super Duty with Sync 3 Upgrade

Question

Question:

I have an 2015 f350 with sync 3 and would like to install an 3rd brake light camera.

asked by: James B

0

Expert Reply:

I spoke to my contact at GCH and they informed me that the Custom Third Brake Light Camera for 8" Factory Monitor part # 3460006 would be compatible on a 2015 Ford F-350 Super Duty with Sync 3 Upgrade.

expert reply by: Conner L

0

Answer 1

I spoke with GCH Automotive about the Truck Bed Cargo Camera for 8" Factory Monitor part #3460006 which is a fit for your 2014 Ford F-350 with Sync 2 and they informed me that you can use either the red wire on the switch for power or the red…

view full answer...

Answer 2

The Custom Third Brake Light Camera for 8" Factory Monitor part #3460006 which is a fit for a 2015 Ford F-350 does come with a switch that can be substituted for a switch of your own such as a pre-existing upfitter stitch. This was been…

view full answer...

Answer 3

I was able to take a picture of the instructions for the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit #3460006 that you referenced. The camera unit actually has a "T" harness that will send the video feed directly to the…

view full answer...

Answer 4

There aren't any additional instruction manuals from GCH regarding the interconnections of the Truck Bed Cargo Camera #3460006 for your 2013 Ford F-350, however I have attached an image below that you might find helpful. This shows what the…

view full answer...

Answer 5

Yes, you can use the upfitter switch on the dash of your 2015 Ford F-350 to switch the Custom Third Brake Light Camera #3460006 on the 8" dash screen when you need to switch from the bumper camera to the 3rd brake light camera. You will simply…

view full answer...

Answer 6

Yes. There is no reason that you can't just use the upfitter switch in your Ford F-250 to connect the power of the Custom 3rd Brake Light Camera #3460006 instead of installing a new switch. I've linked an installation video we did that you…

view full answer...

Answer 7

Both of the red wires on the Custom Third Brake Light Camera for 8" Factory Monitor #3460006 will connect to power on your 2015 Ford F-350, while the black wire needs to be connected to ground. When we installed this wiring kit on a 2015 F-350…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Correct Custom Third Brake Light Camera for 2015 Ford F-350 Super Duty with Sync 3 Upgrade

Product Page this Question was Asked From

Continue Researching