Trailer Brake Controller Installation - 2004 Ford F-250 Video

The amount of clearance you will need around the gooseneck ball is going to depend on the trailer coupled to it. If you were using the Ranch Hitch adapter #AM3100 to tow a 5th wheel trailer using the gooseneck hitch then at the widest point, where…

You are right that the gray port is right next to the diagnostic port under the dash on your 2002 Ford F-150 for the brake controller. I have attached a photo that shows where the brake controller port is in relation to the location of the…

The Fastway e2 Weight Distribution Shank #FA92-02-4213 is a great option, but if you're needing a little more drop then I recommend picking up the Shank #FA92-02-4214 instead because it offers an additional 2" of drop so you can…

All 2005 F150 models would be prewired for installing a brake controller. The gray connector the controller would plug into is located behind and to the right of the diagnostic port under the steering column as shown in the photo I've provided.…

On your 2002 Ford F-250 you will need to connect the Red wire to the Black wire on the brake controller for +12 Volts power and the Light Green wire to the Red Stoplight wire on the brake controller. The Dark Blue wire is connected to the Blue wire…

I attached a page that I took from the install instructions for the Curt brake controller #C51170 that you referenced that covers the install of the knob of the brake controller. Basically a backing plate attaches to the dash with included hardware…

I am not sure which Hayes brake controller that you have, but in reviewing the installation instructions for the Hayes-Lemmerz Energize III+ Electric Trailer Brake Controller #HA81742B I found that there is a section that goes over if the…

Brake controller wiring adapter #3035-P is the correct one for use with a Prodigy P3 controller #90195 in a 2016 Ford Explorer equipped with the factory 7-way trailer socket. This wiring adapter plugs in at the back of the controller and at the brake…

I do have an option for you but most factory motorhome trailer hitches have a maximum capacity of 5,000 lbs. If you have a larger vehicle that you need to tow, this will have to be replaced. I don't have a bolt-on option for you but still an…

We do recommend installing the 2 center bolts in Curt 5th wheel installation kit #C16443-204 for your 2001 Ford F-350 though it is not required. The center bolts add additional stability and considering the weights involved with 5th wheel towing it…

The Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703 is not a fit guided item. As long as your frame is within those width dimensions, it will work for your 2016 Forest River Sabre Lite. This hitch can be bolted…

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…