Review of CURT Trailer Brake Controller - Venturer NEXT Trailer Brake Controler - C74VV Video

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

The 12 volt power wire that runs to the Curt Triflex part #C24VV is hot all the time but when the controller isn't in use it goes into a sleep mode that prevents the battery from draining when not used for a while.

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like…

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

Thank you for the picture! It actually looks like you already have a 7-Way socket installed on your 2006 Lexus GX 470. If you check out the attached photo of the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector…

For your 2019 Chevy Express Van I recommend going with the Tekonsha Prodigy P3 #90195 brake controller. This is a great brake controller that applies the brakes on your trailer at the same time and with the same intensity as the brakes on your van.…

I did some checking and it looks like the recommended procedure for flat towing your 2017 Chevy Express 2500 van is by installing a lube pump in the transmission. A driveshaft disconnect would not be needed. While we don't carry a lube pump we do…

For your 2017 Chevrolet Express Van we do have brake controller solutions but the vehicle does not have a port under the dash for installing a brake controller. Instead it has wiring available under the dash or sometimes the driver side floor mat up…

I recommend starting by checking both the tow vehicle side and trailer side connectors. Check to make sure that they are free of any debris or corrosion, cleaning out as needed. The D.C. message you are getting on the Curt Triflex #C24VV indicates no…

Brake controller wiring adapter #3035-P is the correct one for use with a Prodigy P3 controller #90195 in a 2016 Ford Explorer equipped with the factory 7-way trailer socket. This wiring adapter plugs in at the back of the controller and at the brake…

I attached an install video that uses the 7-way adapter part #37185 and a Tekonsha brake controller but it would be the same process as any Curt brake controller like the #C24VV since the wire colors are the same.

A brake controller should have no affect on the way the truck brakes when a trailer isn't connected. I'd recommend disconnecting it though right now to see if somehow the wiring is causing an issue. If it is the wiring it'll be the red…