Review of Wheel Masters Wheel Covers Hubcaps - Replacement Wheel Lug Nut - WMRMT9063 Video

Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…

Based on my research it looks like your 2011 Forest River Georgetown is built on the Ford F-53 chassis. If this is the case then you can use the Plug-In Adapter Harness #3035-P to install your Tekonsha Prodigy P3 Brake Controller #90195 (excellent…

The brake controller connector is located on the left side of the steering column support, as shown in the provided photo. You'll need the #3035-P brake controller wiring harness.

I found your Dicor V160FOLNC lug nut cover, and while we do not have a direct replacement we do have something that is pretty close that should work. Check out the Replacement Wheel Master Lug Nut Cover for Wheel Liner #WMRMT9061. This lug nut cover…

I measured the Replacement Wheel Master Lug Nut Cover #WMRMT9061 and it has an overall height of 1.6 inches.

We do have the 22 mm version of the Replacement 20 mm Lug Nut for Wheel Master Wheel Liner #WMRMT9063. The #WM9062 is what you're looking for. Also yes, the Replacement Wheel Master Lug Nut Cover #WMRMT9061 will fit the 22 mm so you won't…

We have the Replacement Wheel Master Lug Nut Cover for Wheel Liner part #WMRMT9061 available. These are designed to go over the keeper nuts to give you a nice clean look. We also offer a 33mm part #WM9005-6, 7/8" Covers part #WM8019, 1"…

The Phoenix USA Lug Nut Covers #PXQ33T are the closest option to the Phoenix USA Front Hub Cover w/ Pop Out #PXQ822F lug nut covers that you referenced. They are 2-3/4" tall and fit 33mm hex lug nuts.

Try to get the part number of the wheel cover so I can confirm the correct replacement part for you. For the wheel cover lug nut we have #WMRMT9063 and here is a cover for the lug nuts #WMRMT9061. You will need to measure the outer diameter of the…

The lug nut cover part #WMRMT9061 is made from stainless steel and could work if you have a 20 mm lug nut on your wheels like the part #WMRMT9063 that this was designed to fit. We do not have anything made from tin though.

We do have the stainless steel lug covers available in a few sizes. We do not have a way to look up exactly what lug nut size your 2016 Winnebago Sunstar LX uses, so we will need you to verify that information. The stainless lug covers are available…

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.