Availability Of Stainless/Chrome Lug Covers For A 2016 Winnebago Sunstar LX Motorhome

Question

Question:

I am looking for a chrome/steel lug nut covers for a 2016 Winnebago Sunstar LX with 19.5 wheels. It is a Ford F53 chassis.

asked by: Lin K

0

Expert Reply:

We do have the stainless steel lug covers available in a few sizes. We do not have a way to look up exactly what lug nut size your 2016 Winnebago Sunstar LX uses, so we will need you to verify that information. The stainless lug covers are available in the following sizes:

1-1/2" Lug Nuts # WM8012
1-1/16" Lug Nuts # WM8011
1" Lug Nuts # WM8010
7/8" Lug Nuts # WM8019
33 mm Lug Nuts # WM9005-6

expert reply by: Jesse M

0

Answer 1

The Phoenix USA Lug Nut Covers #PXQ33T are the closest option to the Phoenix USA Front Hub Cover w/ Pop Out #PXQ822F lug nut covers that you referenced. They are 2-3/4" tall and fit 33mm hex lug nuts.

view full answer...

Answer 2

I measured the Replacement Wheel Master Lug Nut Cover #WMRMT9061 and it has an overall height of 1.6 inches.

view full answer...

Answer 3

The lug nut cover part #WMRMT9061 is made from stainless steel and could work if you have a 20 mm lug nut on your wheels like the part #WMRMT9063 that this was designed to fit. We do not have anything made from tin though.

view full answer...

Answer 4

Try to get the part number of the wheel cover so I can confirm the correct replacement part for you. For the wheel cover lug nut we have #WMRMT9063 and here is a cover for the lug nuts #WMRMT9061. You will need to measure the outer diameter of the…

view full answer...

Answer 5

We do have the 22 mm version of the Replacement 20 mm Lug Nut for Wheel Master Wheel Liner #WMRMT9063. The #WM9062 is what you're looking for. Also yes, the Replacement Wheel Master Lug Nut Cover #WMRMT9061 will fit the 22 mm so you won't…

view full answer...

Answer 6

I found your Dicor V160FOLNC lug nut cover, and while we do not have a direct replacement we do have something that is pretty close that should work. Check out the Replacement Wheel Master Lug Nut Cover for Wheel Liner #WMRMT9061. This lug nut cover…

view full answer...

Answer 7

We have the Replacement Wheel Master Lug Nut Cover for Wheel Liner part #WMRMT9061 available. These are designed to go over the keeper nuts to give you a nice clean look. We also offer a 33mm part #WM9005-6, 7/8" Covers part #WM8019, 1"…

view full answer...

Answer 8

In order to determine if #WMRMT9061 will work for your 2017 Ford F-150, you'll need to measure or remember what size socket you use to remove your lug nuts is. If you measured 33mm, then #WM9005-6 will work for you. If you measured 1-1/16",…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The Firestone Ride-Rite Air Helper Springs #F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. These have a 5,000lb capacity to enhance your factory suspension under load. This will not…

view full answer...

Answer 12

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...