Wheel Masters Tools - Levels - WM6700 Review Video

If you look at the diagram that I received from my contact at Demco, you can see several of the dimensions of the #DM14793-81 trailer coupler. If there were other dimensions you were needing, please let me know.

Nearly all A-frame trailer have a 50 degree angle frame, the Demco A-Frame Trailer Coupler #DM14793-81 that you referenced has a 50 degree angle too.

There will be no trailer coupler latch repair kit for an Atwood Trailer Coupler 88555 which is discontinued. Unfortunately, the only option is a full replacement for which I recommend the Demco A-Frame Trailer Coupler part #DM14793-81. This coupler…

Yes, the Longview #CTM4000 are confirmed for your 2002 Toyota Tundra if if has manual, electric, or heated electric mirrors. These are custom fit and confirmed for your truck, and are sold as a pair of mirrors. If you are looking for something more…

Yes, if you relocate the support arm on your Solera Power RV Awning you can then switch over to the Solera 12' Black Fade RV Awning Roller and Fabric part #LCV000211455. Once you obtain the new roller tube you can insert it into the support…

I do have an option for you but I would not be able to advise on using the Folding Bumper Mounted Tire Carrier part #TR-2 outside of its intended purpose which is to be mounted to a square 4 x 4 bumper on the rear of a trailer. I also do not have…

Since your awning is 18 feet in length the Solera Family room you have to go with is the part #LC362233 since this is the correct size for your application. I attached a picture of what the privacy panels look like.

In order to determine the correct screen room for your awning you will need to know the width. The same is true for the Solera family room. Our available Lippert screen rooms are designed for use on select Solera, Carefree, and Dometic RV awnings.…

The overall length of the Camco AccuLevel Trailer Bubble Level #CAM25563 is 10 inches in length overall and 3 inches tall.

The #100914-120-MBS is designed to fit on propane tanks with Type 1 fittings, but typically ASME 100-lbs tanks have POL fittings; this customer might have needed an adapter because they didn't have the correct hose to begin with. If you've…

I spoke with my contact at Wheel Masters regarding the concerns you have for the Level Master Trailer Bubble Level #WM6700. She stated that the unit will hold up well through the movement, shock, and vibration that that it will incur while mounted to…

Most regulators like the part #CAM59005 have an inlet of 1/4 inch SAE and an outlet of 3/8 NPT. It would be out of the ordinary if your tank to regulator wasn't 1/4 inch SAE inverted flare. Part #CAM59053 has this style of fittings on both sides.…