Review of Swagman RV and Camper Hitch - Bumper Mount Hitch - S64025 Video

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

All of the trailer hitches available for the 2013 Chevrolet Sonic are Class I trailer hitches. Most Class I trailer hitch receivers have a tab inside of the receiver to allow only certain accessories to be used with the receiver. This tab is intended…

We do offer light-duty 1-1/4-inch hitch receivers for your 2014 Chevrolet Sonic Hatchback. These hitches have the capacity to carry 2 bikes on a compatible Class I bike rack. We have a hitch that installs on your hatchback without need for cutting…

The Stromberg Carlson 2" Motor Home Hitch Receiver for 4-1/2" x 4" Bumpers - 200 lbs #BA-100 has a 6 inch square base and bolt holes that are 5 inches on center. I've attached a photo and video to assist. The bolt holes are about…

I am happy to report that the TorkLift StableLoad Suspension Upgrade #TLA7200 does not require drilling on your 2022 Ford F-250 super duty. I went ahead and attached a photo of from the instructional manual for you to check out. It is important to…

For the 3" hitch on your 2020 Ford F-350 Dually we have the Blue Ox Hitch Receiver Immobilizer for 3" Hitches #BLU85QR. This hitch receiver immobilizer will keep your tow bar, drop receiver, bike rack and other hitch-mounted accessories…

We do have the Blue Ox Immobilizer part #BLU85QR that fits the 3 inch hitch of your new 2020 Ford Super Duty.

You are going to want to trim the block down about an inch. We have seen this issue before on similar GMC trucks and if you don't trim the block down the suspension is going to feel incredibly rough. If you trim about an inch off and match the…

In order to flat-tow a 2019 Ford Fusion Hybrid you will need a tow bar, base plate kit, safety cables, supplemental braking system, a tail light wiring harness, and a few other smaller components. It sounds like you already have the tow bar and…

I cannot make a recommendation for pulling a trailer behind another trailer. I know it is done, but there are many things to take into account when thinking about this endeavor. You will need to contact the trailer manufacturer to see if the bumper…

The Blue Ox Base Plate Kit #BX2666 is a fit for a 2019 Ford Fusion Sport so you would instead need the Roadmaster Direct-Connect Base Plate Kit #RM-524458-5. This base plate is compatible with Hybrid and Energy models as well as models with Adaptive…

The Roadmaster Even Brake #RM-9400 is not compatible if your 2019 Ford Fusion has the active braking system as you found in the instructions. This is a fairly universal product so even though it does show up in the fitguide for your Fusion there is a…