Hitch Immobilizer For A 2020 Ford F-350 Dually With A 3" Receiver Tube Opening

Question

Question:

Does anyone make this for a 3inch Hitch? I have a 2020 Ford F-350 Dually and it has a 3inch Hitch. Thank you

asked by: Steve W

0

Expert Reply:

For the 3" hitch on your 2020 Ford F-350 Dually we have the Blue Ox Hitch Receiver Immobilizer for 3" Hitches # BLU85QR. This hitch receiver immobilizer will keep your tow bar, drop receiver, bike rack and other hitch-mounted accessories from rattling and shifting while you're on the road.

expert reply by: Kevin C

0

Answer 1

You are going to want to trim the block down about an inch. We have seen this issue before on similar GMC trucks and if you don't trim the block down the suspension is going to feel incredibly rough. If you trim about an inch off and match the…

view full answer...

Answer 2

I am happy to report that the TorkLift StableLoad Suspension Upgrade #TLA7200 does not require drilling on your 2022 Ford F-250 super duty. I went ahead and attached a photo of from the instructional manual for you to check out. It is important to…

view full answer...

Answer 3

We do have the Blue Ox Immobilizer part #BLU85QR that fits the 3 inch hitch of your new 2020 Ford Super Duty.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Hitch Immobilizer For A 2020 Ford F-350 Dually With A 3" Receiver Tube Opening

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching