Review of SuperSprings Intl Vehicle Suspension - SuperCoils Front Axle Suspension Coils - SSC-25 Video

We do have a hitch extender that will work for your application. After looking thru the available options, it seems the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches #GY89SR is going to be your best bet. This extension is 14"…

Yes, the Gen-Y Adjustable 2-Ball Mount #325-GH-414 can be used with any standard 2" ball mount or trailer hitch receiver, such as what your SUV is already equipped with. For just the receiver portion of this unit without the hitch balls you…

As long as you are not exceeding the tongue weight rating of the trailer hitch receiver or dual hitch receiver adapter, you will not have any issues adding your 150lb accessory with the adapter as is, but I do not recommend modifying the adapter in…

Using a hitch extender does cut the tongue weight capacity of the vehicle it is installed in by 50 percent. Since yours is rated for 350 lbs you'd be limited to 175 lb but we do have a 14 inch hitch extender with the Gen-Y part #GY89SR which…

I have a possible solution, but none of the 14-16" extensions have a high enough capacity. The only thing that comes close is the Gen-Y #GY89SR which has a gross towing weight of 10,000 lbs, but the max tongue weight is only 500 lbs. This would…

If the plow was going to be on the truck quite a bit the best solution would be heavier coils for the front of the truck with part #SSC-25 which will give you 2 inches of additional height. Otherwise I would go with an air kit like part #F4193 that…

No, the Hellwig Helper springs like the part #HE62FR that you referenced do not affect the unloaded ride height.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…