Review of Roadmaster Tow Bar - Non-Binding Hitch Mount Style - RM-422 Video

We have a product designed exactly for your application. What you need is the part #RM-9332. This wires directly to the battery of the vehicle and gives you an outlet to power the Blue Ox Patriot part #BLU37TR. This way you can have your vehicle…

I checked with my contact at Roadmaster and they told me that the internal diameter of the Replacement Spacer for Roadmaster Sterling Tow Bar Adapter #RM-A001818A is 1.0075".

The Roadmaster Tow Bar to Blue Ox Brackets Adapter #RM-031 works on Sterling tow bars with serial numbers up to 16,500. If serial number is higher (which it looks like yours is), you will instead use #RM-031-5. Since you already have the adapter, you…

A front mount trailer hitch like #31084 can be used for a winch or for pushing around a trailer to get it in the right position but you can not use it to tow your 1991 Jeep Cherokee. You would not be able to turn properly with a single attachment…

When using the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422 it is still important to stay within 3"of level. The All Terrain is a non-binding tow-bar which makes it easier to unhook your vehicle on uneven ground. The…

Thank you for your photo Jim. It does look like the inner arms of your Falcon 5250 got bent somehow. I contacted Roadmaster and there are not replacement inner arms available for the Falcon 5250 anymore or a repair kit because it's an older bar.…

Hopkins offers a flex cable, part #HM47053 that sounds exactly like what you need. On one end, it has the 7-way plug that's compatible with your RV, and a 6-way plug on the other that would plug into your towed vehicle. I'll link you to some…

The Blue Ox Patriot Radio Frequency, Portable Braking System part #BLU37TR is a proportional unit which means it applies the brakes in an amount/force similar to that as they are applied in the motorhome. Therefore, if you are parked and pressing the…

We definitely have options to flat tow your 2021 Chevy Silverado 2500 and the following will be some recommendations to get you on the road. With that being said, I included some review and install videos of these recommendations for you to check out…

If you are using a supplemental braking system like the #BLU37TR which powers through a cigarette lighter outlet and the vehicle requires the battery be disconnected what you'll need is the part #RM-9332 which runs directly to the disconnected…

I checked with Roadmaster and they thought that you had possibly trimmed back too much around the active cruise control sensor. If this is the case then a new plastic piece will need to be ordered or take it to Ford to see if it can be re-calibrated.…

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…