Roadmaster Tow Bar Wiring RM-732 Review Video

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

To flat tow your 2023 GMC Canyon Denali with a 2017 Tiffin Allegro, I recommend the following parts: Aluminum Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 and item #RM-674 Battery Disconnect - Roadmaster Battery Disconnect…

Yes we do. If your 2024 Jeep Wrangler has the Parksense parking sensor alerts the kit you'd need is the #RM63MR or if you do not have the parking sensors you'd want the #RM-15267.

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

It is possible to convert your 13-pin connector to a 7-way. You will need the Curt 2 to 3 Wire Tail Light Converter #C56196 to combine the separate brake and tail lights you have now. You will also need the #H20042 you looked at which is 3' long…

If you need to convert a 3 wire system on a motorhome to a 2 wire system on a standard trailer or towed vehicle, then the Roadmaster Brite-Lite Wiring Converter #RM-732 is the correct fit and is compatible with LED lights. I've attached a diagram…

The most likely cause for the turn signals not to work when the running lights are on with your trailer is a bad or weak ground. It's very possible that a weak ground connection can be just strong enough to allow sufficient current for some…

There is not a standard cold cranking amp rating for all 2,500 lb winches. They will each be different as they do not all draw the same amount of power, therefore the manufacturer will specify this. If you take a look in the owner's manual for…

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

The Commercial truck plug will have the functions shown with the stop lamp separated from the turn signals as you stated. so you will need the Roadmaster Brite-Lite Wiring Converter #RM-732 to combine those signals for you to make them compatible…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let me know. If…