Brake Buddy Stealth Supplemental Braking System Installation - 2007 Jeep Wrangler Video

Without something connected to the wiring of the Brake Buddy Stealth that would tell it that there is a connection made to a trailer or towed vehicle it will not show messages like you mentioned on the display.

According to my research, the 2019 Kia Soul can be flat-towed with all four wheels down if it has a manual transmission. However, I strongly recommend you confirm this with your local dealer as the owner's manual was not very clear on whether…

We have items available for flat towing a Kia Soul because depending on specific specs of each vehicle some are able to be flat-towed. We always defer to the recommendation that our neighbors follow their vehicle specific guidelines. If your…

It looks like you're pretty much on track. The #RM-676 Nighthawk tow bar would be a good choice, it includes the safety cables and the wire umbilical as well as the wiring connector that would install on the front of the Cherokee.…

The most likely reason the install of an Invisi-Brake part #RM-8700 would interfere with the braking of a towed vehicle is an issue with the way the system integrates with the vacuum lines of the vehicle. It's possible the T-fitting adapter…

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56208 referenced in your question is confirmed to work on your 2017 Jeep Cherokee Trailhawk. This will let you wire your Jeep to accept the RV's tail, brake and turn signal lights…

The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 monitor wire comes with "bullet" style connectors. The monitor wire will not connect to the brake light switch wire on your motorhome. It simply runs up to your dash…

You would not need a second check valve. You'd just need to install the check valve of the Break Buddy #HM39530 in the main vacuum line before the Y-fitting that splits the lines off into two lines.

You are correct the Brake Buddy Stealth Supplemental Braking System part #HM39530 needs to be wired to the positive terminal of the vehicle's battery. If you are not using the brake controller and the vehicle is not being towed the dust…

The tail lights on the back of a trailer run off of the running light circuit so the fact that the other lights on that circuit are working and most of the problems are just at the rear tail lights that makes me think there is a ground problem.…

The AutoStop braking systems can be used on several vehicles as long as they are using the correct corresponding tow bar. That being said, our installers here are not big fans of the AutoStops at all. I can't recommend them for you as I don't…

We sure do! The correct replacement slide out motor for your Power Gear 1510000042 is part #LC88UD on our site.