Pro Series Trailer Jack - Side Frame Mount Jack - PS1401420303 Review Video

The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…

I have a couple of jacks that I can recommend for you, but at this time we do not have a pipe mount jack available with the option of a caster wheel. The first and best fit would be the Bulldog Rack-and-Gear Jack with Steel Wheel - Weld On/ Bolt On -…

I trust regular axles with leaf spring suspension more than torsion axles only because I can see what is going on with the suspension and can fix any issues should they arise. With a torsion axle though there really isn't any maintenance you have…

I visited our warehouse and took measurements of both of these jack mounts to confirm their compatibility. Yes, both the 2000-lb-rated Bulldog Jack #BD158109 and the 5000-lb-rated Pro Series Jack #PS1401420303 use the same round 2-inch weld-on pipe…

The grease zerk on the Trailer Valet JXS Trailer Jack #TV64FR will provide Grease #L11390 to the gears inside the head of the jack. This is the only place that I recommend using grease on the jack. I recommend using a dry spray lube like the…

I have a different option for you, but the Trailer Valet JXS Jack #TV64FR is not recommended for use in salt water per my contact at Trailer Valet. Instead you will want to go with the Fulton Marine Jack - Square Tube, Fixed Mount - 28" Lift -…

The Trailer Valet #TV64FR JXS 5K trailer jack is a pipe mount swivel jack that can be removed from the trailer by pulling the pin shown in the provided photo. If you click the provided link, you can see a video showing a typical installation.

The snap ring mount that the #TJB-2001S-B fits is the same 2-1/2 inch diameter as what your trailer has now so it will fit the same mount and work well.

The distance from the center of the pipe mount to the bottom of the foot plate on the Bulldog Pipe Mount Swivel Sidewind Jack part #BD158109 while fully retracted is 10-7/8". I have attached a photo of this for you. If you need something…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

The seal we offer part #RG06-050 cross references as the same thing as a Transcom part #171255TB. It would be the exact same as what you have/need.

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…