Peterson Trailer Lights - Reflectors - B489R Review Video

There would be a noticeable difference if you had both the Aero Pro light #STL37RB and the Glolight, #STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the…

I assume you are referring to butt connectors and if that is the case then these can very well be the cause of your issue as they can trap corrosion over time and cause problems. If you test for power on the wire going into the connector and then…

I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less style…

The Erickson Horizontal E-Track #E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.

It sounds like you will be running screws through both wood and metal to install the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4 #e62VR. I would look for some wood-to-metal screws at the local hardware store to…

We do have a couple of alterative solutions, however we do not carry a replacement that match those dimensions. Instead, I recommend replacing the entire swing down stabilizer with the Stabilizer Jacks #TJ01RT-HD which measures 18" extended,…

It sounds like you likely have an A-Frame trailer, so you can use something like the etrailer Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs #TJA-5000S-B which will attach to the 3 mounting points on the trailer tongue and provide you…

Since we don't have the 94 inch long e-track in sets of 6 you'd have to order them individually with the part #e65VR which the price for these is available at the link below.

I recommend the Fulton Hi-Mount Spare Tire Carrier #FHDSTC0101. This fits 4 to 6 lug wheels up to 16-1/2" diameter. I have included some images below showing how the carrier was mounted to the floor of the trailer angle iron to secure it to the…

The comparable Dexter product would be part #8-285-11, which is an 8K 12-1/4 x 3-3/8 hub/drum with a 8 on 6-1/2 inch bolt circle. The drum comes with the races already installed, but the #25580 and #02475 bearings and #RG06-070 grease seal are sold…

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…