Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. Recessed mount with included gasket - locking ring sold separately. 2-Wire pigtail with 0.18 male bullets. PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronix LED clearance and side marker light. This is a small, round trailer light that's going to function as both a clearance light and side marker light when properly mounted. It's going to feature a sonic-ally sealed design, so it's got a waterproof housing, and the unit is submersible. This is an LED system. LED's are going to make great replacement for incandescent lights. They last longer.
They burn brighter. They're more efficient. You don't have to replace bulbs, and you don't have to worry about brittle filaments. It's an amber lens. It's going to be constructed using a poly carbonate construction when it comes to the lens and housing.
Really nice strong, durable design. This is designed to be a recess mount installation with the included rubber gasket. Installation's going to require a three quarter inch diameter hole at the desired mounting location. We do offer a theft deterrent locking ring. Here at etrailer.com.
It is sold separately, so if you're interested in that, you can check that out. The wiring on the unit's a two wire pigtail, so you're going to have your white wire for ground, black wire for power. Then it's going to have the wire casing that keeps those together and protected. Then it's going to have the 0.18 male bolts 00:01:09 on here. Those can be cut off, and you can expose the wiring for hard-wire applications if desired. It is Department of Transportation compliant.
This is a PC rated light. When it comes to a few of the dimensions, I want to take a diameter measurement here at the part of the light that would be visible. That's going to give us a diameter of right around one inch, then the overall depth of the light . Looks to measure around 7/8ths of an inch. Now it's going to contain one diode, or one LED. We're going to go ahead and hook it up to our actual power source that we can see what it looks like with power running to it. The power draw for this light at 12.8 volts is 0.082 amps. You can see here that the light sends out a really nice, consistent signal. It's a bright light. Again, one LED, and this light is going to function as a side marker light and a clearance light when properly mounted. Optronix is also going to put a lifetime warranty on the LED. That's going to do it for today's look at the Optronix LED clearance and side marker light.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
1" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. Recessed mount with included gasket - locking ring sold separately. 2-Wire pigtail with 0.18 male bullets. PC rated.My order was correct and I received it in a timely manner. I will use etrailer in the future for my trailer need.
Great product
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ronnie
9/29/2021
Great