Review of Optronics Trailer Lights - Stop Turn Tail and Reverse LED Light - OPT37FR Video

The fit kit has rubberized trim that fits to the contours of your roof and the legs attach to the kit, becoming the weather seal. If you remove the rack when it is not in use you have caps to put on the fit kit to protect the mounting hardware. The…

The main difference between the Fusion LED Trailer Tail Light part #STL211XRFHB and the Fusion LED Trailer Tail Light part #OPT37FR is that the stop/turn signal portion of the former is a red lens with red LEDs and the latter is a white lens with red…

The easiest way to cut the oval hole for the Rubber Grommet, #a70gb, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end…

It sounds like your trailer has the 6-1/2 inch Oval stop turn and tail lamps and some side marker lamps that use a rubber grommet like the 6-1/2 inch oval tail lights grommet, #A70GB. Since the area where your lights are mounted is not accessible…

The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…

The closest replacement taillight that we have to the light that you have is the Fusion LED Trailer Tail Light #STL211XRFHB. This tail light has the back-up light feature that yours also has. The difference is in the dimensions. The size of this…

The Fusion LED trailer tail light part #OPT37FR that you referenced is sold individually. If you need two lights you'd need to order a quantity of two of these.

Yes, the Reflex Reflector Flange Cover part #A211RXB that you referenced does fit the GloLight LED trailer tail light part #STL1211RCFHPG that you also mentioned.

Did you have a 4-pin connector that had 5 wires or was it a 5-pin connector? There is a big difference since you normally see a 5-pin connector on a boat trailer with the 5th pin used for an electric reverse lockout solenoid on a brake actuating…

On a 5-Way trailer connector, usually found on boat trailers, the pin on the end furthest from the ground pin is used on an electric reverse lockout on the trailer coupler. This is so when you put the vehicle in reverse, it will single a solenoid on…

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light #MC65AB. These three are all black plastic. They are Optronics #A65PBPG, #A65PB and #A65B. The first two come with a single wire, the…

We have both front and rear options for SumoSprings for your 26,000 lbs Thor Outlaw. For the rear you will want the SumoSprings Maxim Custom Helper Springs item #SSR-187-54-1. These are custom fit and rated for your F-53 chassis. They have a 7,000…