Recommend Front and Rear SumoSprings for a 2021 Thor Outlaw

Question

Question:

Recommend SumoSpring for 2021 Thore Outlaw F-53 ?

asked by: Matt

1

Helpful Expert Reply:

We have both front and rear options for SumoSprings for your 26,000 lbs Thor Outlaw. For the rear you will want the SumoSprings Maxim Custom Helper Springs item # SSR-187-54-1. These are custom fit and rated for your F-53 chassis. They have a 7,000 lbs capacity. These will help level out your motorhome and also minimize sway.

We also have the SumoSprings Rebel Custom Helper Springs item # SSF-170-40-2. These mount on your front end and have a 3,000 lbs capacity. They help with that top heavy feeling when you are making turns.

I have linked a couple of installation videos below.

expert reply by: Jerred H

1

Answer 1

For your 18k 2016 Jayco Alante 26AY the correct SumoSpring kit is the part #SSF-170-40-2 for the front axle. This kit is designed for GVWRs of between 16k and 22k which will work perfectly for you. Recently SumoSprings changed quite a few of their…

view full answer...

Answer 2

The SumoSprings Maxim Custom Helper Springs #SSF-170-40-2 are a confirmed fit on your 2016 Thor ACE, as long it's 2-wheel drive. These springs install with both a top and bottom bracket in place of your factory bumpstops. They don't…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 11

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 12

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...