Optronics Trailer Lights A91BOB Review Video

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

It sounds like there is a short circuit that is overloading the running light circuit in the tow package wiring on your tow vehicle. The most likely culprit is a dirty or corroded trailer connector on the vehicle or trailer if not both. The first…

If you don't have a need for a license plate on your boat trailer then there's no reason you can't use the Optronics LED Trailer Light - Passenger Side #STL56RB (which doesn't include the license plate light) on both sides of the…

LED Trailer Tail Light #STL56RB is for the right hand side of the trailer. The left side is #STL57RB. You couldn't mount these lights upside down because they hang from bolt heads and could fall off.

Yes, The Thinline LED Clearance and Side Marker Light #AL91AB has 2 male connector posts on it. This waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. It is 2-1/2 inches long by 1-3/16 inches…

The Optronics Grommet #A91GB that you referenced, which is designed to work with the Thinline LED #AL91RB that you were looking at, will install into a mounting hole on the trailer that is 2-7/8 inches across and 1-1/2 inches tall. If you do not have…

It depends on the material of the trailer surface you are wanting to mount it on. You could use screws on wood surfaces, self-tapping screws for sheet metal, or nuts and bolts would work on sheet metal. To remove the old ones, you can drill out the…

The Thinline LED Clearance and Side Marker Light #AL91AB require certain mounting brackets and plugs that are either already installed on the trailer or are available separately. A Right Angle 2-Wire Pigtail #A46PB will work with the Grommet #A91GB…

The Curt Trailer Connector #C57672 should be grounded to any paint and debris free surface, preferably the vehicle frame; since the hitch is painted, it's not going to provide the best ground source for your 7 way connection. You can extend the…

Though we do have direct replacements for the Grote 45253 light you have, they will be incandescent as well so won't be what you are looking for. With that said, as the spot where a light can mount will limit the size you can go with, I think the…

I have a solution for you but I am sorry I am not seeing anything in our system or online with A-91G15B. It may be an outdated part that has been discontinued. I would guess someone just used a different mounting bracket on one of the sides. We do…