Optronics Mounting Bracket with Wedge
Question:
I have a boat trailer with two Optronics flush mount red rear clearance light. One has a grommet mount A-91GB the other has a grommet mount of A-91G15B. The second is an angled mount. I dont understand why one side is different from the other. They are both mounted on the side of the trailer facing the same way the lug nuts for the rims face. 90 degrees to the brake lights. So I have two questions. Can you get me the A-91G15B grommet and why would they both not be the same?
asked by: Troy T
Expert Reply:
I have a solution for you but I am sorry I am not seeing anything in our system or online with A-91G15B. It may be an outdated part that has been discontinued. I would guess someone just used a different mounting bracket on one of the sides. We do have an angled mounting bracket that is similar to the item # A91GB you referenced. It is Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black item # A91GZB. The black PVC grommet has built-in wedge that allows A/AL91 series lights to be mounted at an angle. It provides a shock mount to lengthen lamp life.
Products Referenced in This Question
Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 3-5/16 Inch Long
- Rectangle
- Optronics
more information >
Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 3-3/8 Inch Long
- Rectangle
- Optronics
more information >
Product Page this Question was Asked From
Mounting Bracket for Optronics A91, AL82, AL90, AL91, or AL191 Series Lights - Open Back - Black
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Black
- Optronics
more information >
Continue Researching
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Optronics Trailer Reflector - Adhesive Backing - Rectangle - Red
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Shop: Mounting Bracket for Optronics A91, AL82, AL90, AL91, or AL191 Series Lights - Open Back - Black
- Shop: Optronics Mini Red LED Clearance or Side Marker Light - Submersible - 2 Diodes - Clear Lens
- Shop: Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black
- Shop: Trailer Wiring
- Video: Optronics Trailer Lights A46PB Review
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Video: Optronics LED Clearance or Side Marker Light Review and Installation
- Video: Review of Optronics Trailer Lights - Indentification Light Bar with Utility Light - OPT88FR
- Video: Optronics Trailer Lights A86PB Review
- Video: Optronics Lights Mounting Bracket Installation
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20400 Review
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Lights
- Q&A: Clearance and Side Marker Light With Clear Lens and Red LEDs
- Q&A: What is the Depth of Optronics 2-Wire Pigtail?
- Q&A: How to Establish Ground Connection When Re-Wiring Aluminum Trailer
- Q&A: Size of Mounting Hole Required for Installing Optronics Grommet # A91GB
- Q&A: Wiring Pigtail and Mounting Bracket Options For Installing Thinline LED Clearance And Marker Lights
- Q&A: What Hardware is Best for Mounting Trailer Light Mounting Bracket to the Trailer Surface
- Q&A: Why is 10 or 12 Gauge Wire Recommended for Electric Brake Assemblies
- Shop: Vehicle Tow Bar Wiring
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Search Results: 5 wire trailer harness
- Search Results: pl~10
- Search Results: pc2
- Search Results: splice connectors