How Much Does the Reese M5 5th Wheel Hitch for the Ford Factory Puck System Weigh?

Question

Question:

How much does the Reese M5 pn RP68FR weigh and does it fit the Ford factory puck system?

asked by: Jim W

0

Expert Reply:

The Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package item # RP68FR weighs 204 lbs. This hitch does fit the Ford factory puck system.

expert reply by: Jerred H

0

Answer 1

The hitch with the highest towing capacity as of right now for your 2021 Ford F-350 is the Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package #RP68FR. This hitch will fit with your OEM prep package and has a 1-piece, wraparound jaw and…

view full answer...

Answer 2

I've never heard of a 5th wheel hitch using fans, but it is possible for parts on a 5th wheel hitch to wear out over time and need to be replaced just like other equipment on your RV (suspension parts, awning, vent/AC just to name a few). Any…

view full answer...

Answer 3

The Reese M5 5th Wheel Trailer Hitch #RP68FR has the highest capacity of any hitch that will drop into the factory pucks on your 2024 Ford F-350. This hitch is rated for trailers up to 32,000lbs with a tongue weight up to 6,400lbs.

view full answer...

Answer 4

Yes the Reese 32k fifth wheel hitch part #RP68FR that you referenced is the same as the Reese part number 30940.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

How Much Does the Reese M5 5th Wheel Hitch for the Ford Factory Puck System Weigh?

Product Page this Question was Asked From

Continue Researching