Review of Lippert Components RV Awnings - LC643921 Video

Hey Jim! The Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921 is a pretty simple installation that just requires you to remove the mounting screws, remove the cover, and then reverse the…

Since you have a regal-style Solera awning the correct front cover for the drive head would be part #LC643922. If you needed to replace the idler head as well then you'd want part #LC643923. If the back side of the cover is damaged for…

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached…

Yes we do. The correct rear cover you need is the part #LC289567 to match the front cover #LC643923 you referenced and the picture you sent in.

While I do not have a video demonstrating how to install or remove the idler head and drive head cover for the Lippert Edge Awnings, it is a pretty simple process. You will need to extend the awning out far enough to get access to behind the cover,…

Yes. All Solera awning fabric replacements like the #LCV000334341 come with the spot for a poly cord to be installed the length of the awning, which allows you to slide the light strip holder on and install your LED lights. You will want to save…

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're…

Thanks for the information. I checked with Lippert and didn't get anything back on the first two numbers and the last one is a fire safety code. The good thing is there aren't many options for replacement motor covers for Solera…

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This…

The Replacement Lock Cylinder #LC213116 does not come with a replacement key but you can order them separately with part number #LC230012.

Yes, the speaker is included with this replacement. Replacement Cover for Solera Regal Power Awning Speaker Idler Head - Front - Black #LC731464.