Kodiak Trailer Brakes - Disc Brakes - K2R526S Review Video

I have attached a link to all of our trailer hubs that use #L68149 and #L44649 bearings and have a 5 on 4-1/2 bolt pattern. I recommend the Dexter Trailer Hub Assembly #8-247-50UC3-EZ. This hub features a grease cap that is compatible with EZ lube…

You can use 6-on-5-1/2 idler hub assembly #AKIHUB-655-6-EZ-K for your application. This hub kit includes bearings 25580 and 15123 along with races and a grease seal.

You are correct that the issue is on your trailer and based on what you are describing the circuits are somehow swapped when you installed your connector; unfortunately, I was unable to find your order number to see what you purchased from us for the…

Yes, the HydraStar Electric-Hydraulic Actuator Kit #CAR-HBA16-2 is compatible with the Ford factory-installed trailer brake controller in your 2014 Ford F-350. You will just want to check that the unit's main menu is set for EOH operation rather…

I'd need more info on your axles to know if the hub you mentioned would fit. Is there a sticker or label on it with any info/part numbers? Otherwise you'd have to pull off a hub to get me the dimensions of the spindle or the bearing numbers.…

Based on the information you provided I am nearly positive you would need the part #RG06-070 for replacement seals as these have an ID of 2.250 and an OD of 3.376. Based on the lug pattern and weight capacity of your axles these would be the correct…

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

The Kodiak Disc Brake Kit #K2R526S does come with brake pads. When it is time to replace those brake pads, you will want part #K225CP. The disc brake kit will fit wheels 15 inches and up, with axles rated 5,200 to 6,000 pounds. The rotor will fit…

There actually is no real difference. They have the same dimensions, fit the same applications, and are both double lip seals. Our part number for the 10-36 is the #RG06-070.

The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

The 8.75-16.5 tire size has an overall diameter of 29.5 inches and the tire size 235/80-16 like part #TTWTRTM2358016E has a diameter of 30.8 inches.