Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL

Question

Question:

What is the difference between a 10-36 grease seal and a GS-2250DL seal? I need bearings and seals for Lippert 5200 lb axels on a 5th wheel.

asked by: Michael D

0

Expert Reply:

There actually is no real difference. They have the same dimensions, fit the same applications, and are both double lip seals. Our part number for the 10-36 is the # RG06-070.

expert reply by: Jameson C

0

Answer 1

Thanks for the pictures of your lights! Based on that you'd want the part #328-003-19R for red lights that match what you have and #328-003-19A for amber. These ground through a white wire but you can run that white wire's ring…

view full answer...

Answer 2

The only way to get a new control panel would be to replace your entire Smart Jack with part #LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the…

view full answer...

Answer 3

You do have a very interesting situation. When it comes to aluminum trailers we always defer to the manufacturer whether it is just a utility trailer or an RV trailer like your toy hauler. Aluminum frames can't always withstand the pressure of a…

view full answer...

Answer 4

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

view full answer...

Answer 5

Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…

view full answer...

Answer 6

In order to run both AC outlets and DC lights off shore power in your ATC Enclosed Trailer you will actually need a AC/DC distribution panel, not a power converter. For this, I recommend using Progressive Dynamics Inteli-Power AC/DC Distribution…

view full answer...

Answer 7

The 8.75-16.5 tire size has an overall diameter of 29.5 inches and the tire size 235/80-16 like part #TTWTRTM2358016E has a diameter of 30.8 inches.

view full answer...

Answer 8

That's an interesting tire size as it is not a standard trailer size. It sounds like you may have a passenger vehicle tire on your vehicle which is not a great idea. Your best option would be the #TTWTRTM2358016E to replace what you have as this…

view full answer...

Answer 9

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 10

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 11

The Dexstar wheel, part #AM20761B, has a maximum capacity of 3,750 pounds. I've linked a video that displays additional specs for you as well.

view full answer...

Answer 12

The Dexter 8-258 Hubs would have came with either #L44643 inner/outer bearings or #L44649 inner/outer bearings. The L44643 bearings have a 1" inner diameter and the L44649 bearing have a 1.063" inner diameter so you will want to measure…

view full answer...

Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching