K Source Mirrors - Blind Spot Mirror - KSC0600 Review Video

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Your slide-in truck camper does not have electric brakes so the blue brake circuit wire from its 7-way connector is not used. All other lighting functions as well as 12V auxiliary power will be maintained on the other circuits. Please refer to the…

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, the Curt front hitch part #C31017 that you referenced will fit your 2005 Dodge Ram 2500 Power Wagon. We checked with Curt and the only version of the 2005 Ram 2500 or 3500 that this hitch won't fit is the 3500 Laramie.

There is a front-mounted trailer hitch receiver that fits a 2006 Dodge Ram 1500, though the correct one will simply depend on the cab that you have and the model. I will list out the fits so you can find exactly what you need for your truck. - 2006…

The Draw-Tite Front Mount Trailer Hitch Receiver part #65046 is designed to sit flush with the underside of the lower bumper fascia skirt on a 2003 Dodge Ram 3500. I have attached a photo which shows this. It sits as close to the underside of the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Go Power 100-Watt Solar Flex Kit #34272630 includes a digital controller and so does the 80-Watt Eco Kit #34272627. Since you need only one controller I suggest adding the expansion panel to avoid having duplicate parts. You can use the Go Power…