Differences Between Curt C31017 and Draw-Tite 65046 on 2007 Dodge Ram Truck
Question:
Could you contrast the “DrawTite” #65046 with the Curt “C31017”? Thanks
asked by: Doug L
Expert Reply:
There's a few differences.
• The Curt # C31017 is manufactured in the US, while the Draw-Tite # 65046 is manufactured in Mexico.
• When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the
receiver tube will sit even with the bottom of the fascia under the bumper. The fascia will need to be notched so
the receiver can pass through it. Unless you're planning on carrying something very heavy on the front of the
truck like a generator weighing more than 350 lbs, you'll probably be happier with the greater ground clearance
provided by the Curt front mounted receiver.
• The Draw-Tite hitch sits lower so that the top of the receiver tube will sit up against the underside of the fascia
under the bumper. You'll lose about 2-1/2 to 3 inches of ground clearance.
• The Draw-Tite has a higher 5000 lb pulling capacity and a higher 500 lb vertical load limit which means you can
carrier heavier items. The Curt has a 3500 lb pulling capacity and a 350 lb vertical load limit.
I've linked to installation instructions for both hitches for you to check out.
Products Referenced in This Question
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 350 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Front Mount Hitch
- Q&A: Can Draw Tite Front Hitch # 65063 Fit 2018 Ram 2500 without Tow Hooks
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Superwinch SX12SR Integrated Off-Road Winch - Synthetic Rope - 12,000 lbs
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Search Results: winch
- Search Results: 65063
- Video: EcoHitch Hidden Front Mount Trailer Hitch Installation - 2018 Ram 2500
- Video: Best 2012 Ram 2500 Front Mount Hitch Options
- Video: Review of EcoHitch Front Receiver Hitch - Custom Fit Hitch - 306-X7900
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Search Results: 31320
- Q&A: Front Hitch Recommendation for a 2005 Dodge Ram Power Wagon
- Q&A: Front Mounted Trailer Hitch Receiver Fit on 2006 Dodge Ram 1500
- Q&A: Total Drop of Curt Front Mounted Receiver # C31017
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: 7-Way Female to 7-Way Female Adapter Recommendation
- Q&A: Does Curt Front Mount Trailer Hitch Sit Higher than Draw-Tite on a 2004 Dodge Ram 4x4
- Q&A: Will Installation of Curt C31017 Front Hitch Require Moving Tow Hooks
- Shop: Vehicle Sway Bars
- Video: Roadmaster Rear Anti-Sway Bar Review
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: front receiver hitch
- Shop: Suspension Enhancement
- Video: Choosing the Right Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)