CIPA Clamp-On HotSpot Mirror - 4" x 8" - Convex

Hello,
Yes you can use my install for feedback.
Only thing is I should have checked to see if you had not sure what they are called but “ brackets “ that go around bars for mirror mount would be nice to have a choice of size. Hard to find and would have saved me shipping and made a bigger sale.
??Maybe you could put a pop up
“ wait before you go, have you considered mounting hardware? What size pipe are you going to mount mirror to? “??
Anyway here is mine.
I Needed to put extension mirrors and wanted square ones to match and found them on your site. I still need to figure out one mount need like a 3” arm and a 1-1/2” and 1” clamps to stabilize passenger mirror.
Two things I didn’t like was..
1, the loose mirrors inside the plastic housing probably going to just put clear silicone on edges.
2, the sticker ....
“ objects in mirrors are closer than they appear “
has glue that’s hard to remove and leaves a residue. Cling on label would have been better.540762

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I mounted these mirrors on our Winnebago Ford E350 chassis. It has the standard Velvac mirrors with the stick-on blind spot mirrors. The stick-ons used up a lot of my flat glass real estate, making it harder to see behind us. To upgrade the Velvacs would have cost a few hundred dollars. Over a two week period I devised a couple of mounting solutions. I bought two 5/16" ubolts to mount onto the mirror arms. The radius was large enough I used fuel line to pad and insulate the ubolts. One thing I appreciate about these mirrors are the wrench flats on the 1/4" stud and the fact that the tension can be adjusted on the ball joint. etrailer good service as usual.436009

Click to Enlarge

I liked this mirror so well on the driver's side, I ordered a second one for the passenger side of my '06 Dodge Sprinter View. Now I have a good side View on both sides of my View! etrailer is a Rock Star!1147650

Click to Enlarge

I needed a spot mirror that would eliminate a blind spot. I mounted this mirror under the original mirror on the mirror arm. Fit perfectly and only took 1 minute to install.1144426

Click to Enlarge

This is a fairly priced, high quality, well made Glass Convex Wide Angle View Mirror in a Thick Black ABS Plastic Case with a Plated 360 Degree Adjustable Steel Mounting Bracket. Perfect “safer vision addition” to the existing bracket mounted Flat View Mirrors on my RV Motorhome. Very satisfied. 565371

Robert

9/15/2019

This mirror is clear and works great!

by: Robert L.04/11/2019

I have found this product to very good. It is a very good quality mirror. Although I might be using it for a slight different purpose than most folks. I modified it and mounted it to a used paint roller handle. Now whenever I feel the need to check my rain gutters on my house I just screw on a painters pole and check all the gutters without having to use a ladder. It has survived being bounced off of the roof, multiple times. I am very happy and recommend to anybody that needs a convex mirror.621528

The mirror was exactly as described. Fast shipping. 126529

Click to Enlarge

The convex mirrors were better than described and very reasonable. Shipping was quick and they were double packed in the box. I'm very happy and they fit perfectly. Thanks again.201778

Lunky

6/7/2016

Working great. Still clear

This was not what I was expecting. I wanted a clamp on mirror for rental boats and I am going to have to rig this thing to fit or toss it. I guess I should have looked into it a little more...819204

Heather A.

6/24/2020

Thank you for your review. I believe you are looking for a clamp on boat mirror like part CM01877.

Installed on my Kubota B1550dt loader tractor so I can see better when backing up. Maybe ordering another for my other Kubota tractor when I come up with a way to mount it. Seems like a good mirror for the low price.557229

Nice large convex mirror. I still have to mount it as it does not fit my vehicle but I'm sure it will work great. Under someone's comments tell you how to do in on a mini Winnie. 558971

I used this mirror to replace the broken one on my hitchfinder. It fit perfectly and now I can connect to the trailers without a spotter.101533

We installed these as replacement mirrors for our older model Nissan forklifts. They are just what we were looking for. Thanks for the quick shipment.64809

Good quality mirror. Bought to replace broken hitch ball finder mirror.281633

Big enough to see, I hate tiny blind spot mirrors98090

Mounted to arm of stock mirror on 2003 E450 Class C motorhome using 1 1/2" u-bolt clamp and spacer. Discarded clamp that came with mirror.
831498

Good price and fast delivery. Will use it as a rear view mirror for the boat while towing skiers.707627

GReat product and better service 1414918

Just want I needed. Thank you. 1375671

Great service! good product 1376668

Love this mirror! We put it on a 17' Scout boat to be able to see behind us. And we can see to the left and to the right if we have a skier. It works great!555224

Items as advertised, fast shipping and great communication with customer service.
Not yet install have to do some modes.599832

So Far Great mirror. Wish it came in white as I had to paint mine.Also took about a week to arrive.184808

Perfect for my need, a wide angle mirror so my boat is legal for pulling a wakesurfer when I don't have a third person as a spotter.226631

I can see again! Definitely better than getting out, and looking to see what I might run over. Too many squirrels died while waiting for its delivery. A true life saver!939123