Review of JR Products RV Fresh Water - Valves - 372160-85-A-36A Video

It appears that your 2015 Dutchmen Aspen Trail 2810BHS came with a Valterra Flush Mount Water Inlet #A01-0168BKVP. This is a plastic construction and may explain why you are needing to replace it. I recommend the RV City Water Flange #372160-85-A-36A…

As you have found out manufacturers make their own compatible plugs to match their own brake controllers. It looks like the Bully controller comes with a universal harness with blunt cut wires. You will need to cut the end off the Hopkins harness…

Thank you for the photo, it was very helpful, and I can confirm that your current B&B city water inlet can be directly replaced with an option from JR Products: - White: RV City Water Inlet with Brass Check Valve - 1/2" MPT #372160-85-A-26A…

We certainly do! If you live nearby, or will be traveling near the Wentzville MO area, we'd be happy to install a hitch for you. Give our Customer Service folks a call for an appointment or for more details.

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

You do not need to use any pipe tape or sealant of any kind when installing the RV City Water Inlet w/ Plastic Check Valve #372160-85-A-3PA.

The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by Optronics. The light has since been discontinued along with the replacement lens but we have had customers use part…

The Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS will fit your 4951KS model fan.

The issue you are having with your MaxxAir MaxxFan 4751KS is more than likely an issue with the circuit board (control board). The circuit board is what is telling the motor to run or stop. The correct replacement circuit board for your MaxxAir…

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

You'd need a new circuit board for your MaxxFan #MA99FR to fix the switch issue you are having. For that you'd need the #MA10A04751KS.

It definitely is the circuit board of your MaxxAir roof vent and the correct replacement is the part #MA10A04751KS.