Hopkins Wiring - Trailer Connectors - HM38138 Review Video

On the Wishbone 4-Way Trailer Wiring Harness #A35W42B each wire is 20 gauge. It doesn't seem like much but it is more than enough for basic trailer light functions (stop, tail, turn, and running lights). I have linked a video featuring this…

It could be possible that your 2012 Boat trailer is wired with a wishbone style harness. Similar to Item #A25W2GWB. This type of harness just allows the installer to run each side separate rather than splicing and running extra wires across the…

You are correct, the Replacement Tail Block Locking Assembly #8880334 is only for the 2015 and up model year Rack and Roll trailers. According to Yakima, the reason is the thickness and length of the shaft was increased, so it's a different size.…

I took a look at what we have for your Yakima Rack And Roll Trailer #Y08106 & #Y08107, and I was able to find the: -Replacement Lock Core and Keys for Yakima Rack and Roll Trailer #8880551 for key S305, and the, -Replacement Lock Core and Keys…

For your Yakima Rack And Roll 78" trailer #Y08107 you will want to use Replacement Tail Block Locking Assembly for Yakima Rack and Roll Trailer 2015 and Newer - Qty 1 #8880334 and then the Replacement Lock Core and Keys for Yakima Rack and Roll…

Thanks for the picture! The 3rd Brake Light Logic Module item #PP20-702 you were looking at is exactly what you need to activate a third brake light on your 2022 Ford F-150's Overland camper topper. Once connected, this module allows the third…

The part #PP20-702 has to connect to both the left and right hand turn signal/stoplight circuits in order to separate out the stoplight. The reason that is because it waits to see voltage on both circuits at same time to then allow the stoplight…

For your 2021 Chevrolet Silverado you will have to splice into the factory wiring to use the 3rd Brake Light Logic Module #PP20-702 to connect the left and right turn signals, along with the green wire. You can also combine this harness #PP20-702…

The Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer #T35Z or #T355 measure 5-1/4 inches from the bottom up to the bottom of the top plate the D-ring is on. They are 3-1/2 inches wide and 2 inches deep. They are designed to fit in 2x4 stake…

The Replacement 4" LED Tail Light for Yakima Rack and Roll Trailer #8880212 are the correct replacements for your current incandescent tail lights on your 2006 Yakima Rack and Roll trailer. To convert the running lights you can simply replace…

If your 2019 Chevy Express Van does not have any trailer wiring or a hitch there's a strong chance you don't have it but you can verify this by checking the VIN with a Chevy dealer. So for trailer wiring you'd want to start with the 4-way…

For your 2017 Chevrolet Express Van we do have brake controller solutions but the vehicle does not have a port under the dash for installing a brake controller. Instead it has wiring available under the dash or sometimes the driver side floor mat up…